HiRO H50212 - Manual (Page 150)

User’s Guide Configuring your Computers
150
33
DNS Configuration
This page is used to configure the DNS server ip addresses for
DNS Relay.
DHCP Server Configuration - Attain DNS
Automatically
1. From the head Services menu, click on DNS.
2. From check ratio, click on Attain DNS Automatically.
3. Click
on Apply Changes.
4. From the left-hand menu, click on Save.
Field Description
Attain DNS
Automatically Select this item if you want to use the DNS servers
obtained by the WAN interface via the auto-
configuration mechanism.
Set DNS
Manually Select this item to configure up to three DNS IP
addresses.
Function Button Description
Apply Changes Set new DNS relay configuration. New parameters will
take effect after save into flash memory and reboot the
system. See section “Admin” for save details.
Reset Selected Discard your changes.