HiRO H50212 - Manual (Page 137)

User’s Guide Configuring your Computers
137
Fields on the
first setting
block Description
Enabled/Disabled Radio buttons to enable/disable the interface group
feature. If disabled, all interfaces belong to the default
group.
Interface groups To manipulate a mapping group:
1. Select a group from the table.
2. Select interfaces from the available/grouped
interface list and add it to the grouped/available
interface list using the arrow buttons to manipulate the
required mapping of the ports.
3. Click “Apply Changes” button to save the changes.
Function
buttons Description
Apply Changes Save SNMP configuration. New configuration will take
effect after saving into flash memory and rebooting the
system. See section “Admin” for details.