INFICON Protec P3000(XL) Helium Leak Detector - Manual (Page 120)

7-15
Maintenance
k
in
a
26
e Ch
ap
te
r
7
.fm
Tech
ni
ca
l Ha
nd
bo
ok
(1
20
9)
On the certificate which is delivered with the replacement gas reservoir you will find
a new serial number and a 12-digit-code containing the new leak rate and other leak
specific information. In the software menu please go to “
HISTORY & MAINTENANCE /
REPLACE PRO-C HECK ”. In the opening sub-menu enter the new serial number in the
first line and the 12-digit-code in the second line and press okay.
Notice This submenu only is available if the Protec P3000 is set to ADVANCED
mode (see Section 4.4.3 , User Mode)
Notice The PRO-Check reference leak must be installed in the Protec P3000
when pressing OK.
Fig. 7-20 Gap between PRO-Check and front panel
Fig. 7-21 Entry screen for replacing the PRO-Check