INFICON Protec P3000(XL) Helium Leak Detector - Manual (Page 25)

General Information
1-15
k
in
a
26
e Ch
ap
te
r
1
.fm
Tech
ni
ca
l Ha
nd
bo
ook
(1
20
9)
Holder for SL3000
sniffer line (optional)
An optional holder for the SL3000 sniffer line is available as cat.-no. 525-006. The
holder may be installed on the right or left side of the main unit (for right- or left
handed operators) as shown in
Fig. 1-8 .
The installation is described in Fig. 1-8 . There are two little slots on the front side at
the very top area of the blue square front of the main unit. Hold the holder horizontally
and then insert the two little hooks of the holder into the two slots (either on the right
or the left side). With the hooks still inserted, let the holder flap down. It will
automatically attach to the metal front by the magnet on the backside of the holder.
Now insert the sniffer probe grip into the opening of the holder and let it sink down
until it rests in the holder.
Fig. 1-6 Protec P3000 with external display unit for: (a) benchtop use (left side), (b)
rack mounting (rigth side)
Fig. 1-7 Usage of sniffer line holder