KD Scientific Legato 100 Series - Manual (Page 19)

19
Configuring the KDS Legato 100 Series
K
D
S
L
e
g
a
to
1
0
0
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 100 Series Syringe Pump User’s Manual
Publication 5617-006 Rev D
Target Volume/Time Selection
1. In the Configuration Display enter the target
volume or time. In this example we want a
volume of 5 ml.
2. Depending on the Mode either Target Volume
(I/W or W/I) will appear or Target Volume or
Target Time Selection (I only or W only).
3. To change the units, press the units.
4. In the Units Selection Display select the
volume units.
✐
NOTE: For time enter h:m:s. or press
again to select secs. Time is accurate to
+/- 0.01secs. Remember to enter the :
✐
NOTE: Target time is only allowed in
infusion only or withdrawal only modes.
Press to select target volume
Press to select the
maximum volume
for the syringe
size selected
Press to select target time
Press to change the units
Press Here
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com