KD Scientific Legato 100 Series - Manual (Page 25)

25
Configuring the KDS Legato 100 Series
K
D
S
L
e
g
a
to
1
0
0
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 100 Series Syringe Pump User’s Manual
Publication 5617-006 Rev D
Setting Display Brightness
The backlight can be adjusted.
In the Set-up screen, select Display Brightness
Press to select % Display Brightness
Select the % Display Brightness. For example, if
you select 80%, the brightness of the display will
be 80% of the maximum.
Accept the changes made by pressing
and go back to the Set-up screen.
Cancel the changes made by pressing
and go back to the Set-up screen.
For a Custom Value
Use this selection if the % is not listed.
Press Other Value to enter a custom %
Enter the percentage.
Accept the changes made by pressing
and go back to the Set-up screen.
Cancel the changes made by pressing
and go back to the Set-up screen.
Press Here
Press here for custom
display brightness level
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com