MacDon DWA for M Series User Manual
Page 19
Advertising
SET UP INSTRUCTIONS
169216
Revision
E
17
4. Cut hole in decal and install ROTARY switch
(C) as shown. The hole is already present in
the mounting plate.
5. Remove knockout in cover (A) for ROCKER
switch. File down the burrs.
6. Install knob (D) on ROTARY switch (C).
Tighten set screw in knob with Allen wrench
(E). (Knob not exactly as shown.)
7. Install ROCKER switch (F) in cover. The
side with the prongs should be next to the
Operator’s seat.
8. Install ROCKER switch into plug (G) and
install ROTARY switch into plug (H). These
plugs come with the windrower and are
inside the console.
9. Re-install cover (A) with five screws (B).
B
A
H
G
F
D
E
C
Advertising