MacDon DWA for M Series - Manual (Page 8)

SET UP INSTRUCTIONS
169216 Revision E 6
D
D
E
E
M150/M200 BEFORE
M150/M200 AFTER
M205
D E B
M155
E
B
D
DWA DRIVE BLOCK
A
B
E
D
SUPERCHARGE PUMP
COOLER BY-PASS
RELIEF VALVE
M150/M200 OVERVIEW SHOWN
5. Remove hose (E) from cooler by-pass relief
valve and connect to fitting (B) at port “P” on
DWA drive block. The other end of hose is
connected to the super charge pump.
NOTE: Access to hose (E) can be from
underneath windrower or by raising
windrower hood and working from the left
hand platform.
6. Install the other end of hose (D) to cooler by-
pass relief valve. This is where hose (E) was
disconnected.
E
B
DWA DRIVE BLOCK
D