3checking and adjusting drive belt tracking, Checking and adjusting drive belt tracking – MacDon HC10 for D-Series User Manual
Page 106
Advertising
6.
Replace cover and secure with washer and wing-nut.
Figure 5.14
5.7.3
Checking and Adjusting Drive Belt Tracking
Proper tracking of the belt ensures there is no rubbing of the belt on either pulley.
1.
Remove wing nut (A) and washer, and remove drive
cover (B).
Figure 5.15
2.
Check the belt and both pulleys (A) for evidence of
belt rubbing.
Figure 5.16
169254
98
Rev. D
Advertising