The raysafe cassette holder – RaySafe Solo User Manual
Page 36
4. expose and align the fluorescent line with the preferred black line (selected sensor) on the alignment lid.
Soften the lighting if needed and comply with your local regulations of radiation protection when adjusting
the place of the holder.
5. Remove the lid and measure. (Repeat step 3 – 4 if needed.)
the RAySAfe CASSette holdeR
the RaySafe cassette holder can be used for measuring dose to film or when checking the exposure control,
e.g. AeC systems.
the holder is 24 x 30 cm (10 x 12 in) and makes it possible to measure on all three AeC chambers at once,
without repositioning the detector.
put the detector in the holder and place the holder with the detector perpendicular to the anode-cathode axis
of the tube and expose. (you may need to turn the holder to cover up the right area below the AeC chambers.)
36
RaySafe Solo User Manual – Accessories