Battery and charger – RaySafe Solo User Manual
Page 9
BAtteRy And ChARGeR
the RaySafe Solo base unit has a chargeable 7.4 V li-ion battery, providing approximately 20 – 40 hours of
operation (depending on selected detector and whether Bluetooth is used). Since chargeable batteries have a
self discharge current, RaySafe strongly recommends fully charging the battery before first use. Battery level is
displayed, together with setup information, when the instrument is switched on.
there are two battery warning levels:
• first warning level, “Battery low”: finish your measurements and then charge the battery.
• Second warning level, “Battery down”: no further measurements are recommended.
the provided battery charger may be connected during measurement. When connected, the external power
indicator is lit and Charging battery will be briefly displayed.
the battery will be charged even if the instrument is turned off. the charge time from empty to full is
approximately 4 hours.
9
RaySafe Solo User Manual – Getting Started