RaySafe i2 System - Manual (Page 12)

12
RaySafe i2 System User Manual – Using the real time display
onlIne vIew – vIew CURRent doSe RAteS
Figure 5. The online view
NOTE Dosimeters are shown on a first come first serve principle (see “reserved slots menu” in
section “Admin Settings menu” on page 20). Dosimeters that are not shown in the online
view still measure and store dose data (see “Dosimeter memory” on page 31).
the icon in the upper left corner gives you access to the real time display settings view (see section “Real time
display settings view” on page 18).
the accumulated dose per examination column shows the accumulated dose since last tap on the reset button
in the lower right corner. the accumulated dose per examination will also be reset when restarting the real
time display.
NOTE The accumulated dose per examination is only recorded in the real time display memory. The
values recorded in the dosimeter is not affected.
NOTE When resetting the accumulated dose per examination, values of all dosimeters with
connection to that display will be affected, not only the ones currently visible.