Electromagnetic compatibility (emc) – RaySafe i2 System User Manual

Page 41

Advertising
background image

41

RaySafe i2 System User Manual – Safety

eleCtRoMAgnetIC CoMpAtIBIlIty (eMC)

this Unfors RaySafe product complies with relevant international and national laws and standards on eMC
(electromagnetic compatibility) for this type of product when used as intended. Such laws and standards
define both the permissible electromagnetic emission levels from equipment and its required immunity to
electromagnetic interference from external sources.

other electronic products exceeding the limits defined in such eMC standards could, under unusual
circumstances, affect the operation of the product.

• Information technology equipment (Ite) and medical electrical products need special precautions

regarding eMC, and need to be installed and put into service according to eMC information provided in the
accompanying documents.

• the use of accessories and cables other than those specified may result in increased emission or

decreased immunity levels.

• the product should not be used adjacent to or stacked with other products and that if adjacent or stacked

use is necessary, it should be observed to verify normal operation.

this equipment is intended for use in a hospital environment. operation in other than hospital environments
may compromise electromagnetic compatibility.

the real time display and dosimeter comply with part 15 of the fCC Rules. operation is subject to the following
conditions :(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Changes or modifications to the equipment not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

this device complies with Industry Canada license-exempt RSS standard(s).

operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire
de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.

this class A digital apparatus complies with Canadian ICeS-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

the real time display and dosimeter have been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the fCC Rules. these limits are designed to provide reasonable protection

Advertising