Brother NC8100H - Manual (Page 101)

CHAPTER 9 NOVELL NETWARE PRINTING
9-14
Configuring the Brother Print / Fax server
(Queue Server Mode in NDS mode) using
PCONSOLE and BRCONFIG
1. Make sure that you are logged in as ADMIN in NDS mode on the
NetWare 4.1x file server.
2. Run the PCONSOLE utility from PC workstation.
3. Select Print / Fax servers from the Available Options menu.
4. Press INSERT and enter the Print / Fax server Name
Enter the NetWare print service name of the Print / Fax server exactly as it
appeared in the printer configuration page (the default name is BRN_xxxxxx_P1,
where "xxxxxx" is the last six digits of the Ethernet address (MAC address),
unless you changed the name to something else). You can find the NetWare print
service name and MAC address by printing out the printer configuration page.
Refer to the Quick Setup Guide for information on how to print the configuration
page on your Print / Fax server.
Important:
Do not assign a password to the Print / Fax server or it will not log in.
5. Return to the main Available Options menu by pressing ESCAPE.
6. Select Print Queues.
7. Press INSERT type in the desired print queue name (you will also be
asked for a volume name. Press INSERT and select the appropriate
volume), and press ESCAPE to return to the main menu.
8. Make sure that the new queue name is highlighted, and press ENTER.
9. Select Print / Fax servers and press ENTER to specify which network
Print / Fax servers can print jobs from this print queue. The list will be
empty, since none have been selected.
10. Press INSERT to get a list of the queue server candidates and select the
NetWare Print / Fax server name from step 4, which will then be added
to the list. Press ENTER.
11. Select Printers from the Available Options menu.
12. Press INSERT and enter a descriptive name for the printer.
13. Press ESCAPE and go back to the Available Options menu.
14. Select Print / Fax servers and select the name of the printer server that
you entered in Step 4.
15. Highlight the Printers option in the Print / Fax server Information menu.
16. Press INSERT and select the name of the printers you entered in Step 12.
17. Press ESCAPE several times to return to DOS.