Brother NC8100H - Manual (Page 83)

CHAPTER 8 BIP INTERNET PRINTING INSTALLATION
8-8
10. You will then be asked to enter the port settings for the remote Print /
Fax server:
Enter any unique legal Internet E-mail address for the remote Print / Fax
server (for example [email protected]). Note that Internet E-mail
addresses cannot have spaces in them.
Enter your E-mail address and the IP address of your SMTP E-mail
server (consult your network administrator if you do not know this
address). Also specify if you are going to use the Partial E-mail Print
option and Notification type.
11. Press OK to continue. You will then be asked to re-start your computer.
12. Once your computer has re-started you must create a printer on your
Windows
®
95/98/Me/NT
®
4.0/2000/XP system using the standard
Windows ® 95/98/Me/NT ® 4.0/2000/XP printer setup procedure. To do
this, go the Start button, select Settings and then Printers (Windows ®
95/98/Me/NT ® 4.0/2000/XP). To do this, go to the Control Panel, select
Printers and Other Hardware and then Printers and Faxes (or Add a
printer) (Windows
® XP).
13. Select Add Printer to begin the printer installation.
14. Click Next when you get the Add Printer Wizard window.
(For Windows
® 95/98/Me user)
15. Select Local Printer, when you are asked how the printers are connected
to your computer and push Next.
(For Windows
®
NT
®
4.0/2000 user)
15. Select Local Printer, and then delete the check mark in Plug and Play
check box.
(For Windows
®
XP user)
15. Select Local Printer attached to this comuputer.