Brother NC8100H User Manual
Page 18
CHAPTER 1 TCP/IP CONFIGURATION
1-4
Changing the IP Address using the
BRAdmin application
Start the BRAdmin application (from Windows
®
95/98/Me/NT
®
4.0/2000/XP).
The BRAdmin application can use the IPX/SPX or TCP/IP protocols to
communicate with the Brother Print / Fax server. As the default IP address of
Brother Print / Fax servers is 192.0.0.192, the Print / Fax server will probably be
incompatible with the IP address numbering scheme on your network. If you are
not using DHCP, BOOTP or RARP, you will want to change the IP address.
There are two ways that you can do this from within BRAdmin.
1. Use the IPX/SPX protocol
2. Use the TCP/IP protocol and let BRAdmin find the Brother Print / Fax
server. Double click the Print / Fax Server you wish to change the IP
Address and enter the password.
3. Select the TCP/IP tab and change the IP Address as necessary.