Brother NC8100H - Manual (Page 160)

CHAPTER 15 Brother BFP Software
15-4
Changing the BFP Port Settings
If you have more than one networked FAX/MFC with an NC-8000 or NC-8100h
Print/Fax Server you may want to change the settings of the BFP software to use an
alternative machine as the network fax print server.
To alter BFP settings, select Start | Settings | Printers to open the Printers dialogue
box. From the Printers Windows
®
illustrated below highlight the Brother Internet Fax
driver and right click the mouse. From the list presented select Properties.
Figure 5 BFP Settings
You are now presented with the screen below, which allows you to configure the
BFP settings. To change the details of the print server that receives the fax for
onward sending select the details tab.
Figure 6 Brother Internet Fax Printer Driver
Below is shown the current configuration to alter this press the Port Settings key.