Brother NC8100H - Manual (Page 111)

CHAPTER 11 DLC PRINTING
11-2
Configuring DLC on Windows
®
NT
®
/2000
To use DLC on Windows
® NT ® , you must first install the DLC protocol.
1. Log into Windows ® NT ® with administrative privileges. Go to the NT
Control Panel and double click on the Network icon. Windows
®
2000
users select the properties of the Local Area Connection.
2. On Windows ® NT ® 3.5x systems, select Add Software. On Windows ®
NT ® 4.0 systems, click on the Protocol tab, and click Add. Windows ®
2000 users click the Install button from the General Tab.
3. Select DLC Protocol and then OK or Add if using Windows ® 2000. You
may be asked for the location of the files, for Intel based computers, the
necessary files are stored in the i386 directory of the Windows
® NT ®
CD-ROM. If you have a non-Intel platform, specify the correct directory
on your Windows
® NT ® CD-ROM. Click Continue (for 3.5x systems) or
Close (for 4.0 systems).
4. Reboot your system to make the change take effect. Windows ® 2000
should not require a re-boot.