Brother NC8100H - Manual (Page 135)

CHAPTER 13 TROUBLESHOOTING
13-9
Windows
®
NT
®
/LAN Server (TCP/IP)
Troubleshooting
If you are having trouble printing with Windows
® NT ® or LAN
Server, check the following:
1. Make sure that TCP/IP and TCP/IP print service are installed and
running on the Windows ® NT ® system or the LAN Server file server.
2. If you are using DHCP and you have not created a reservation for the
Print / Fax server, make sure that you enter the NetBIOS name of the
Print / Fax server in the "Name or address of server providing lpd" box.
Windows
®
95/98/Me Peer to Peer Print
(LPR) Troubleshooting
If you are having trouble printing on a Windows
® 95/98/Me Peer-to-
Peer network (LPR method), check the following:
1. Make sure that the Brother LPR Port driver is correctly installed and
configured according to the Windows ® 95/98/Me Peer-to-Peer chapter 7.
You may find that during the installation of BLP software, the
screen that prompts you for a Port name is not displayed. This may
happen on some Windows
® 95/98/Me computers. Press the ALT and
TAB keys to make it appear.