Brother NC8100H - Manual (Page 146)

CHAPTER 14 BROTHER NETWORK PC FAX SOFTWARE
14-4
Setting Up Sending Information
Brother Network PC Fax can be configured through the Sending tab.
This software can be used in a network environment and with a locally
connected machine. It is important that when used in a network environment
the Network PC Fax is set to enable.
The include header option sends an additional page of information along
with fax or E-mail data which contains user and subject information.
If the Network PC Fax is being used, a private telephone exchange system
and an outside line access number is needed this can be pre programmed in
the Dial Settings on the Sending Information page.
The user has the choice of two interfaces. To change the user interface
change the interface setting above.
Facsimile
Style Simple Style
Important Information
Please ensure that Network
Fax is “Enabled”.