Installation, Wiring diagrams – Regency Liberty L390PB Medium Gas Insert User Manual

Page 24

Advertising
background image

24

L

390

PB-2 / HZI

390

PB-2 Direct Vent Gas Insert

INSTALLATION

CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can
cause improper and dangerous operation.

Caution: Ensure that the wires do not touch any
hot surfaces and are away from sharp edges.

WIRING DIAGRAMS

This heater does not require a 120V A.C. supply for operation. In case of a power failure, the burner switch and the optional remote control/ thermostat
will continue to operate. However, a 120V A.C. power supply is needed for the fan/blower operation.

WARNING:

Electrical Grounding Instructions
This appliance is equipped with a three pronged (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded
three-prong receptacle. Do not cut or remove the grounding prong from this plug.

Neutral

Live

Black

Black

Minimum Convection

Air Temp. Switch

Ground

ON

OFF

120V AC

Fan

White

Black

Advertising
This manual is related to the following products: