Telematrix SP750 - Manual (Page 23)

23
Using A Flash When Dialing
To use a Flash when dialing, simply press the “FLASH” key at the appropriate
point in the number sequence being dialed from the key pad.
Programming Flash Timing into Memory
(Administrator)
Flash Timing can be programmed into the Spectrum PLUS
TM speed dial memory.
This function allows for a timed line break in the sequence of the dialing patterns
when using the speed dial keys. This function may be required for accessing line
features provided by your telephone system or local telephone company. The
flash timing options are 100 through 1000 milliseconds, programmable in 100mS
increments.
NOTE: Each “Flash” function counts as 1-digit when stored into a speed dial memory location
FLASH TIME SET
Set up flash timing
100mS to 1000mS.
Default 600mS.
FLASH TIME SET
12/01
PM
12:00
600
!