Telematrix SP750 - Manual (Page 26)

26
Programming a Pause into Speed Dial Memory
(Administrator)
Pause(s) can be programmed into the speed dial memory. This function puts a
delay the dialing pattern of a number when stored in memory. Multiple pauses
can be programmed into speed dial for added pause time.
Using a Pause when Dialing
To use a Pause when dialing, simply press the “PAUSE” key at the appropriate
point in the number sequence being dialed from the key pad.
To Program A Timed Pause
1. To store a Pause into Speed Dial memory,
simply press the “PAUSE” key in the
numbering sequence when programming
speed dial memory keys.
Also see Programming Speed Dialing in this manual .
NOTE: Each “Pause” function counts as 1-digit when stored into a speed dial memory location..
NOTE: The default Pause timing is 3.6 Seconds.
A multiple of Pauses can be programmed
into speed dial memory to increase the delay.
!
!
Note: Programming can
only be performed when
the phone is on-hook
!