Telematrix SP750 User Manual
Page 32
32
To Verify Speed Dial Programming
(Administrator)
The contents of each speed dial location can be verified or “checked” while the
Spectrum PLUS
TM
unit is in the programming mode.
To Verify Speed Dial Locations
1. Press and hold the “STORE” key quickly. The words “SET UP MONTH: 01”
will appear (figure 1).
2. Next, press the speed dial location key to verify. The display will show the
memory location, the name, and the number in memory.
3. To check other memory locations, simply press other speed dial locations.
4. To exit the program mode, press “DISC”.
•
Memory verification is accomplished with the Spectrum PLUS
TM
on-hook.
Note: Programming can
only be performed when
phone is on-hook
!
NOTE: Blank index card sheets are provided for
convenience. Complete and place the index
card into the speed dial memory key.
!
NOTE: A Caller ID record cannot be stored into the speed dial key memory
location. Entries can only be made manually by the Administrator programming
feature. This is for purposes of security and standardization of speed dial
locations.
!