Telematrix SP750 - Manual (Page 49)

49
The “DIAL” key allows the user to call back either stored records or the displayed number
on the LCD. A displayed number on the LCD comes from incoming calls, or from the
Phonebook memory. The Dial Back editing feature allows the user to add or delete charac-
ters to accurately pattern the number to be called. To activate the editing feature, press
any character on the keypad to activate after the record is found.
Scrolling and Call Back Feature
Instructions to find a record:
Scrolling For The Most Current Caller
ID Records
1. If the current record is not displayed,
press the “↓” key to reach the most
current record.
2. Press “↓” key again to review the next
most current record.
3. Continue “↓” to continue the search.
Scrolling For Stored Records
Pressing the “↑” or “↓” scrolling keys allows user to review all calls in Caller ID records.
When scrolling crosses from the most current record to first record, or from the first re-
cord to most current record stored in memory, the LCD will display “END OF LIST” indi-
cating the rollover. Location number and time and date will also change to the date of the
call record displayed.
Scrolling For The Oldest Caller ID Re-
cords
1. Press the “↓” key to reach the most
current record
2. Then press the “↑” key.
3. The LCD screen displays “END OF
LIST” indicating the CID screen is at
the beginning of stored memory.
4. Press “↑” key again to review the old-
est records in stored memory.
5. Continue next record up to continue
the search.
NOTE: The DIAL key will dial any number
that is displayed on the LCD screen. If a
number is not displayed on the screen,
then there is no number in memory.
Contact your local telephone service pro-
vider to see what services they offer to
recognize private party calls or anony-
mous calls that elect to NOT forward their
phone number.
NOTE: Be sure to enter the area code
in AREA CODE set up. The area code
entered allows the phone to recognize
and eliminate your local area code
when dialing out.
!
!