Rockwell Automation 1413-ME-PEA Capacitor Bank Controller - Series B - Manual (Page 13)

Publication 1413-UM001C-EN-P - May 2006
Installation 11
Assemble, Mount, and
Connect Your Controller This section describes how to mount the MicroLogix 1500 controller
and connect it to an AIC+ interface and PanelView module for use
with the capacitor bank controller.
MicroLogix 1500 Controller (All Configurations)
1. Mount the MicroLogix 1500 base unit (1).
2. Install the MicroLogix 1500 processor module (2).
TIP
Please refer to Publication 1746-UM001, Chapter 2, for
information on performing these tasks.
Mounting Template