Additional hmi, With ethernet powermonitor 1413-cap-me a – Rockwell Automation 1413-ME-PEA Capacitor Bank Controller - Series B User Manual
Page 64
Publication 1413-UM001C-EN-P - May 2006
62 Catalog Number Explanation
With Ethernet Powermonitor 1413-CAP-ME A
Includes base controller and one Powermonitor PM3000-M5 meter on
the Ethernet network. Note that ME = Ethernet meter communications.
Communications between the MicroLogix controller and the
Powermonitor meter are RS-485 serial.
Additional HMI
To add a serial PanelView 550 HMI to the system, add PS or PE to the
catalog number. A PS indicates HMI with serial communications. A PE
indicates HMI with Ethernet communications. When PS or PE is
omitted, only the DAT is supplied.
Serial Base Unit with Serial HMI 1413-CAP-MS-PS A
Uses the standard HMI on the front of the MicroLogix controller and
includes a small, serial PanelView 550 HMI in addition.
Serial Base Unit with Ethernet HMI 1413-CAP-MS-PE A
Uses the standard HMI on the front of the MicroLogix controller and
includes a small, Ethernet PanelView 550 HMI in addition.
Ethernet Base Unit with Ethernet HMI 1413-CAP-ME-PE A
Uses the standard HMI on the front of the MicroLogix controller and
includes a small, Ethernet PanelView 550 HMI in addition. This option
includes Ethernet communications from HMI to both the MicroLogix
controller and the Powermonitor PM-3000 M5 meter. The controller
still uses RS-485 to gather control data from the PM directly.