Non-cinema operation, 1 acsar 2 input facilities, 2 monitoring acsar 2 selected source – Barco R9010111 User Manual
Page 19: Acsar 2 input facilities, Monitoring acsar 2 selected source
5. Non-Cinema Operation
5. NON-CINEMA OPERATION
Overview
•
•
Monitoring ACSAR 2 selected Source
•
•
Introduction
This section explains how to display “alternative content” originating from a standard definition or high definition non-cinema source.
Such a source routes to a DVI (Digital Visual Interface) port in the D-Cine Premiere DP100 projector head, and bypass cinema
processing when selected.
ACSAR 2
Input 1
Input 2
Input 3
Input 4
Image 5-1
Location of the ACSAR 2
5.1 ACSAR 2 Input facilities
Input facilities
The ACSAR 2 can be filled up with a mixture of the following input modules (maximum 4):
Input module
Order number
DVI input
R9850960
HD-SDI input
R9853130
RGB analog (up to UXGA)
R9853120
SDI input
R9850970
S-Video/Composite Video input
R9850920
YUV/RGsB input
R9850940
For further info about source connection to the input module, File service, Picture tuning, Window and Layout adjustment, refer to
the installation manual of the D-Cine Premiere DP100.
5.2 Monitoring ACSAR 2 selected Source
Monitoring
A monitor, connected to output “ACSAR 2 Preview” on the D-Cine Premiere DP100 input panel, displays in preview the image on
the output of the Alternative Content switcher.
R5976907 D-CINE PREMIERE DP100 02/11/2005
15