Barco R9010111 - Manual (Page 22)

5. Non-Cinema Operation
5.4.2 Remote Control Functions
Function of the RCU keys
No function
No function
Menu keys
No function
Text On/Off
Image Freeze
ACSAR Input
Image keys
IR LED
Macro keys
Lamp On/Off
Lens keys
Pause On/Off
Address key
Image 5-6
Function of the RCU keys
Ref. Key name Description
1 Menu keys Keys used to enter, to exit, to scroll in....the menus
2 Address key (Recessed key) Allows to match the address of the projector.
Procedure: press a digit key , 0 to 9, while pressing the address key.
3 Pause On/Off Press pause key to stop image display. The image disappear but full power is retained for
immediate restart when pause key is pressed again.
4 Lamp On/Off After power on the projector, pressing this key starts ignition of the lamp. Pressing again,
turns of the lamp.
5 Lens keys Press this key to call up the lens menu. Further, use the menu keys to execute lens
adjustment.
6 Macro keys Pressing a digit key, 0 to 9, activate the respective macro in sequence of storing.
7 IR LED Blinks (together with the background lighting) when a key is pressed. Is a visual indication
of the proper working of the remote control (Battery load).
8 ACSAR 2 input Press this key to select the ACSAR input menu. Further, use the menu keys to select the
image layout (Full 1, 2, 3 or 4 or a combination of the 4 - each image displayed in a quarter
of the window - or the 4 at the same time.
9 Image freeze Press to freeze the displayed image from an ACSAR 2 after the input has been chosen
(see key F5)
18 R5976907 D-CINE PREMIERE DP100 02/11/2005