Maintenance of the d-cine premiere dp100, 1 lamp unit replacement, 1 removal of the lamp house – Barco R9010111 User Manual
Page 27: 1 access to lamp unit, 2 removal of the lamp unit, Lamp unit replacement, Removal of the lamp house, Access to lamp unit, Removal of the lamp unit
7. Maintenance of the D-Cine Premiere DP100
7. MAINTENANCE OF THE D-CINE PREMIERE DP100
Overview
•
7.1 Lamp Unit replacement
Overview
•
•
7.1.1
Removal of the Lamp House
7.1.1.1 Access to lamp Unit
How to access the lamp unit
1. Insert the lock key in the keyhole on the lamp house door. (image 7-1)
2. Turn the key to the right to unlock the door.
3. Turn the door to the right to open.
Image 7-1
Access to lamp casing
7.1.1.2 Removal of the Lamp Unit
C
AUTION
:
Lamp casing is very hot after operation. To avoid burns, let the projector cool down for at least 15
minutes before proceeding to the lamp unit replacement.
How to remove the Lamp unit
1. Loosen the 2 spring screws (A) securing lamp assembly to projector base.
2. Grip the lamp assembly by the bottom handle (B)and partially slide it out of the projector main frame. (image 7-2)
Caution:
Beware of the weight of the lamp assembly. Take the necessary precautions to avoid personal injury.
3. Grip the lamp assembly by both handles (C) and carefully remove the lamp assembly from main frame.
4. Place the lamp assembly on a stable support
R5976907 D-CINE PREMIERE DP100 02/11/2005
23