Barco R9010111 - Manual (Page 34)

9. Image Control
Lens zoom can be performed without removing any cover.
9.2.1 Preparation of the projector
Removing both side panels
1. Loosen the 2 screws on top side and the 2 screws on the bottom side of the cover nearest the lens. (image 9-3)
2. Tilt the cover a little and lift up for removal.
Image 9-3
Right side cover removal
Loosen the dust sock around the lens
1. Pull out the sock fixations from the lens holder and slide it to the front of the projector (only a few points are indicated on the
image). (image 9-4)
Image 9-4
Dust sock removal
9.2.2 Lens Zoom
Zoom can be performed without removing any cover.
How to zoom?
1. Turn the lens barrel, on the second half of the lens, left or right until the desired zoom is reached. (image 9-5)
An end of range notch will indicate that the lens is on its minimum or maximum zoom.
30 R5976907 D-CINE PREMIERE DP100 02/11/2005