Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 143)

143 Publication 1747-UM655B-EN-P - June 2007
Appendix
E
Explicit Message Program Control
Using Explicit Message
Program Control Use the Explicit Message Program Control feature to configure device
parameters on your DeviceNet network via the M0 and M1 files.
Use the Explicit Message Program Control feature to:
•
transmit configuration data from your module to its slave
devices on your DeviceNet network.
•
receive status and diagnostics from these devices on your
DeviceNet network.
•
make runtime adjustments to device parameters according to
changing conditions detected by your processor.