Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 80)

Publication 1747-UM655B-EN-P - June 2007
80 Creating and Running the Example Application Program
Install the Software Follow these steps to install the software.
1. Insert the software CD-ROM installation disk in the drive.
The CD-ROM supports Windows Autorun. If you have Autorun
configured, the installation automatically starts when you insert
the CD-ROM in your drive. If you do not have Autorun
configured, perform steps 2 and 3.
2. From the Windows Start menu, choose Run.
3. Browse for the Setup program on the CD ROM and open it.
4. Follow the prompts that appear as you install the software.
Create the Example
Application Program Follow these steps to create the example application program.
1. Start the RSLogix 500 programming software.
You see the following dialog.