Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 32)

Publication 1747-UM655B-EN-P - June 2007
32 Hardware Setup
For detailed directions on how to install the 1770-KFD module, see
the DeviceNet RS-232 Interface Module Installation Instructions,
publication 1770-5.6.
Installing the SLC 500
Processor These sections give you information on installing your processor and
getting it connected.
Identifying Processor Features
Refer to the following figures to identify the features of your SLC 5/04
or SLC 5/05 processor.
Processor Features
Make sure system power is off; then insert the processor into slot 0 of
the 1746 I/O chassis.
SLC 5/04 Processor SLC 5/05 Processor
SLC 5/04 CPU SLC 5/05 CPU
RUN
FLT
BATT RS232
DH+
FORCE RUN
FLT
BATT RS232
ENET
FORCE
RUN REM PROG PROG REM RUN
Channel 1
DH+
Channel 1
Ethernet
(10/100Base-T)
Channel 0
RS232
(optional
DH485, DF1,
or ASCII) Channel 0
RS232
(optional
DH485, DF1,
or ASCII)