Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 73)

Publication 1747-UM655B-EN-P - June 2007
Communicating with the DeviceNet Network from Another Network 73
You are now online to the DeviceNet network via the Ethernet
network.
See pages 55…62 of this manual for examples of how to use
RSNetWorx for DeviceNet software to adjust network
parameters.
Communicate with the
DeviceNet Network via a
DH+ Network Before performing this example, the DH+ network must be
configured and running. This example uses a SLC 5/04 processor. The
SLC 5/04 processor lets you operate DH+ communication protocol by
means of DH+ communication channel 1.
Configure the DeviceNet Pass-through Driver
You must first configure the DeviceNet pass-through driver (catalog
number 1747-SDNPT) with a DH+ port by using RSLinx software,
version 2.10 or later, before you can communicate with the 1747-SDN
module via a DH+ network.
Follow these steps to configure the DeviceNet pass-through driver.
1. Start RSLinx software.