Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 50)

Publication 1747-UM655B-EN-P - June 2007
50 Configuring the DeviceNet Network
Using RSNetWorx for
DeviceNet Software to
Configure the 1747-SDN
Module Scanlist Use RSNetWorx for DeviceNet software to do the following tasks:
•
Set up an online connection
•
Set the 1747-SDN node address
•
Configure the I/O devices
•
Download and save your configuration
Set Up an Online Connection
Follow these steps to set up an online connection to the DeviceNet
network by using the 1770-KFD driver.
1. Start RSNetWorx for DeviceNet software.
The following dialog appears.
2. From the File menu, choose New.
If you have a ControlNet network configured on your system
you may see the following dialog. Otherwise, proceed to step 4.
3. Highlight DeviceNet Configuration and click OK.