Rockwell Automation 1747-DU501 SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade Installation - Manual (Page 3)

SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade 3
Publication 1747-IN019G-EN-P - December 2011
Related Publications
To view and download PDF files, go to the Literature Library at
http://www.rockwellautomation.com/literature .
To order printed copies, contact your Allen-Bradley® Distributor or Rockwell Automation® Sales Office.
System Requirements
• Personal computer with at least a 486 processor
• Windows NT, 2000, or XP operating system
• At least 32 MB of memory or the minimum required by the operating system
• Ethernet connection to SLC processor
Install ControlFLASH
Insert the CD-ROM of the ControlFLASH Firmware Upgrade Kit into your CD-ROM drive. The Setup
Wizard appears to guide you through the installation process.
If a ControlFLASH directory does not yet exist, one is created in your Program Files directory.
Prior to Running ControlFLASH
For OS501 Series C FRN 9 and later, the SNMP Server must be enabled for the upgrade to occur. The
ability to disable the SNMP Server that was added in Series C FRN 9 and later, requires RSLogix™ 500
version 6.30 or higher.
For Refer to this Document Publication
A more detailed description on
how to install and use your
SLC™ 500 Modular Hardware
Style Control System. SLC 500 Modular Hardware Style User Manua 1747-UM011
A more detailed description on
how to install your SLC 500
Modular Processors. SLC 5/03, SLC 5/04, and SLC 5/05 Modular Processors
Installation Instructions 1747-IN009
A more detailed description on
ControlFLASH installation. ControlFlash Firmware Upgrade Software User Manual 1756-UM105
IMPORTANT If an error is encountered during installation, uninstall the previous ControlFLASH firmware
from the computer and try again.