Rockwell Automation 1747-DU501 SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade Installation User Manual
Page 7
Advertising
SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade 7
Publication 1747-IN019G-EN-P - December 2011
8.
Select the appropriate catalog number from the Catalog Number dialog box and click Next.
For Series C Processors, select catalog numbers that are followed by a ‘/C’.
The AB_SNMP.DLL – Enter IP Address dialog box appears.
9.
Enter the IP address for the processor.
IMPORTANT
Use the IP address that was noted in step 2 of the section, Prior to Running
ControlFLASH on page 3. If the processor has been reset to Initial Factory
Conditions, use an available IP address assigned by your network administrator.
Advertising