Rockwell Automation 1747-DU501 SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade Installation - Manual (Page 6)

6 SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade
Publication 1747-IN019G-EN-P - December 2011
3. Insert the SLC 5/05 processor into an SLC chassis.
4. Attach an Ethernet cable to the processor from your computer (or a hub).
5. Apply power to the chassis.
6. Verify that the SLC 5/05 processor key switch is in the PROG or REM PROG (RUN LED
indicator not illuminated) mode.
The Welcome to ControlFLASH dialog box appears.
7. Click Next.
IMPORTANT If you are connecting to the SLC 5/05 processor through a hub, you can use a
standard Ethernet patch cable. If you are connecting directly to the SLC 5/05
processor from your computer, you need to use an Ethernet crossover cable.