Rockwell Automation 1779-KP3R DATA HIGHWAY II - Manual (Page 59)

Appendix
B
BĆ1
Error Codes
This appendix contains the error codes associated with using the KP3
module. The error codes listed in the following tables are broken into
these categories:
KP3 error codes
link–layer error codes
MAC task error codes
local errors
remote errors
extended status error codes
time–critical error codes
KP2 error codes
We use the following abbreviations within this appendix:
This abbreviation: means:
ACK acknowledgement
ADDR address
I/O input/output
lsap link service access point
NAK negative acknowledgement
max maximum
PDU packet data unit
PLC programmable Logic Controller
RDR read data request
RMWS read modify write
SAP source access point
SSAP source SAP
TNS transaction identifier
XIC examine if closed
XIO examine if open
Appendix Objectives
Error Codes