Rockwell Automation 2711C-xxxx PanelView Component HMI Terminals - Manual (Page 101)

Publication 2711C-UM001I-EN-P - July 2014 101
Adding Font Files Appendix B
9. Observe the deleted font file no longer appears in the list of all Font files.
10. Reboot the terminal to remove the file from the design environment.
ATTENTION: If deleting a font from the emulator internal storage,
you need to Flash Save for it to be permanently stored in emulator.
Otherwise, it will be lost once you shut down. To save to internal
storage, select Flash and then Save from the emulator’s main
window menu.
TIP Font files, especially East Asian Fonts, are large and consume
significant space on Internal Storage. Remove all unused fonts
from the terminal.