Rockwell Automation 2711C-xxxx PanelView Component HMI Terminals - Manual (Page 73)

Publication 2711C-UM001I-EN-P - July 2014 73
Cable Connections and Communication Chapter 4
The software installs.
9. Click Finish in the Completing the Found New Hardware Wizard dialog
box for the PanelView USB Remote NDIS Network Device.
Driver Installation Note for Windows 7 and Windows Vista
1. During the initial installation of the USB RNDIS boot loader driver, you
may see the dialog box reporting an unsuccessful installation, as shown
here.
If so, ignore this dialog box and click Close to continue installing the driver
for Windows.