Rockwell Automation 2711C-xxxx PanelView Component HMI Terminals User Manual
Page 76
76
Publication 2711C-UM001I-EN-P - July 2014
Chapter 5 Upgrade Firmware
4. Verify the existing firmware revision of the terminal by looking in the
Configuration Screens, and compare to the firmware revision of the file to
make sure you are performing the desired upgrade.
Refer to View System Information on page 47
for instructions on how to
view the current firmware version.
Firmware Installation Using
Removable Storage Device
The terminal can install firmware from a removable storage device; either a USB
flash drive or an SD storage card. The firmware consists of an Autorun executable
and firmware images that is downloaded from the PanelView Component
technical support website.
The firmware installation starts when the storage device is inserted either while
the terminal is running, or when the terminal is powered on. During the firmware
installation, you can upgrade or downgrade one or more of these firmware
images:
• Windows CE Operating System
• Application
• Communication
• Asian font, Chinese or Korean
The terminal has a firmware partition that accommodates one
user-installable Asian font. A Simsun Chinese font is factory-installed.
Firmware images for the Simsun Chinese font and Gulim Korean font can
be downloaded from the technical support website.
TIP
The currently installed Asian font firmware image is
visible in the list of Configuration Languages on the
Main Screen.