0 - introduction, 1 manual contents, 0 introduction – Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 User Manual

Page 15

Advertising
background image

1Ć1

Introduction

1.0 INTRODUCTION

The products described in this manual are manufactured or

distributed by Reliance Electric Industrial Company.
Version 3.x of the AutoMax Programming Executive uses Microsoft

Windows

to provide a graphic interface for offline operations such

as mapping variable names to I/O points and creating a hierarchical

structure of systems, sections and racks for each application. The

online operations in AutoMax Executive V3.x, e.g., monitoring

variables, are not run under Windows.
AutoMax Executive V3.x will run on IBMĆcompatible 80386Ćbased (or

higher) systems having at least 2 MB of RAM and a 40 MB hard drive.

Significant improvement in performance is possible with additional

memory capacity. The operating system for your computer must be

version 5.0 (or later) of MSĆDOS

(or equivalent).

AutoMax Executive V3.x will run under Windows Version 3.1 (or later).

It will not run under earlier versions of Windows. You must use

Windows 386 enhanced mode. AutoMax Executive V3.x will not run

in Windows real mode. The current version of Windows can be

purchased from Reliance (order M/N 57C389) or from Microsoft.

Microsoft can also provide upgrades if you have an earlier version of

Windows.
Local Area Network Features
AutoMax Executive V3.x can be used on a workstation connected to

a local area network. Network facilities (tokens and file locking,

Version Control Library) are included in this release of AutoMax

Executive V3.x. If more than one person has access to files for your

application, we recommend that you use these facilities to prevent

corruption of your database files and loss of changes to application

task files. See appendix N for information on Tokens and Locking.

See appendix P for information on using the Version Control Library

functions.
Note that the Version Control Library (VCL) facility requires the

Intersolv

Polytron Version Control System (PVCS) Version 5.0 (or

later). The VCL functions are not compatible with earlier versions of

PVCS. PVCS is not required to use the AutoMax Programming

Executive and is not distributed as part of the Programming

Executive. However, you must have PVCS installed on your network

drive in order to use the VCL features in AutoMax Executive V3.x.

1.1

Manual Contents

Listed below is a brief sectionĆbyĆsection summary of the contents of

this instruction manual. Because this instruction manual covers a

wide range of information that applies specifically to the AutoMax

Executive V3.x Programming Executive and to the AutoMax

distributed control system in general, you may want to go over this

summary carefully to decide which sections are of specific interest to

you depending upon your prior knowledge of the AutoMax

distributed control system and your knowledge of Windows.
Appendix J, a quickstart guide, may be helpful as a brief overview of

the Version 3.x Programming Executive.

Advertising