Rockwell Automation MSR42 Curtains Configuration and Diagnostic Software Tool User Manual - Manual (Page 11)

9
Light Curtain Multi-Function Control Module User Manual
Original instructions
The connection is simple and completed in seconds:
• Plug the USB connector into an unused USB-port on your computer.
• Press the suction cup of the sensor head onto the marked position. For a more secure connection, the suction cup may be dampened slightly.
• Interrupt the light curtain (if connected). The communication between the Rockwell device and your computer will be initiated.
4. Configuration Tool for GuardShield Safe 2/Safe 4 Light Curtains
4.1. Introduction
Select the “GuardShield Safe 2/Safe 4” light curtain icon in the selection window ( Figure 9). A new window will appear (Figure 11) with a “warning:
read safety information” symbol. Click on this symbol and read the safety warning. Thereafter click “OK” to continue.
Figure 11: GuardShield Safe 2/Safe 4 welcome screen
The “system designer” tab for Safe 2/Safe 4 screen will allow the user to select the light curtain to be used in the application.
Figure 12: “System Designer”
Input base