Rockwell Automation MSR42 Curtains Configuration and Diagnostic Software Tool User Manual - Manual (Page 9)

7
Light Curtain Multi-Function Control Module User Manual
Original instructions
Figure 8: Installation finished
2.4. Installation USB driver for Optical Interface
The USB driver is installed automatically during the software installation.
Connect the USB Optical Interface to your computer. The drivers will be automatically loaded once the USB Optical interface is plugged into the
available USB port.
2.5. Program start
The Configuration and Diagnostics Software can be started from the desktop icon or the windows start menu.
“Windows-Start” – “Programs” – “Rockwell Automation Applications” – “Configuration and Diagnostic Software” – “Configuration and Diagnostic
Software.”
In the Configuration and Diagnostic Software window ( Figure 9), the following sub programs may be selected:
• GuardShield Safe 2/Safe 4 Safety Light Curtains
• MSR42 Safety Controller
The MSR42 Safety Controller sub program includes configuration and diagnostic functions for GuardShield Micro 400 safety light curtains.
After installation, the authorized user is recommended to immediately enter their user registration
information, as well as to change the password. The first time the program starts up, you will be
automatically prompted to customize the password and user data. Access to the password, as well as the
Optical Interface, must only be permitted for authorized personnel.