Rockwell Automation 1440-VST02-01RA XM-120 Eccentricity Module User Manual
Page 49
Advertising
Publication GMSI10-UM010C-EN-P - May 2010
Installing the XM-120 Eccentricity Module 41
4. Power up the XM-120 module if you haven’t already done so, and start
the XM Serial Configuration Utility program. Click the Start program,
and then select Programs > Entek > XM > Serial Config Utility.
5. Click the Configure button on the XM Serial Configuration Utility
screen. The XM-120 Dynamic Measurement Module Configuration
Tool screen appears.
6. Click the Module tab.
7. In the Firmware Update group, click Update Firmware to initiate the
firmware update. The Open dialog box appears.
8. Navigate to the Firmware directory on the CD and select the
"xm12E.nvs" file.
Click this button to
update the device with
the Eccentricity
firmware
Advertising