B&K AVP1030 - Manual (Page 10)

Page 8
Rear panel view
The AVP back panel is organized into groups of inputs and outputs for audio and video
as shown below.
1. Power switch 9. Analog audio inputs
2. AC fuse holder 10. AM antenna input
3. AC input receptacle 11. FM antenna input
4. Video outputs 12. Tape loop
5. Video inputs 13. V1 loop
6. Digital inputs 14. V2 loop
7. Send/RCV jacks 15. CTRL OUT / IR IN jacks
8. Preouts 16. Surround outputs
Rear panel description
1. Power
switch -
For switching AC power to the AVP preamplifier. Off = O, On = I. The
rocker must be in the on (I) position for the preamplifier to operate.
2. AC fuse
holder -
Holds the AC Line fuse. Replace only with 0.5 A (½ A) 250 V fast blow
fuse.
3. AC input
receptacle
-
For attaching the supplied AC power cord to the preamplifier.