B&K AVP1030 - Manual (Page 26)

Page 24
 
 
 
 
 
 
 
 
 
 
 
 
  
.

  
.

You can toggle between OFF, ON and AC-3 modes by pressing
x
or
y
. This
holds true for the CD, V1, V2, TV, and TNR digital settings.
Digital off- Selects the corresponding AUDIO L/R analog input for Pro Logic
Surround Processing.
Digital on- Selects the corresponding digital input for PCM Pro Logic Surround
Processing. If Dolby Digital is detected, Dolby Digital surround
processing is automatically used.
Digital AC-3- Selects the corresponding digital input for Dolby Digital Surround
Processing. PCM signals are not processed in this mode.
Press ENTER, the display shows:
Press ENTER:
Press ENTER:
Press ENTER:
Press ENTER:
Press ENTER, the display shows:
You can increase to +6.0 dB by pressing the
x
, or decrease to -6.0 dB by
pressing
y
. This holds true for the CD, V1, V2, TV-V3, TUNER, and TAPE level
settings. The level controls are for matching the input levels of all your sources
coming into the preamplifier.
Press ENTER: