Specifications – B&K AVP1030 User Manual
Page 38
Page 36
Specifications
Audio Specifications
Frequency Response (+3 dB):
20 Hz - 100 kHz
Unprocessed
20 Hz - 100 kHz
Processed
Input Sensitivity:
63 mV
Maximum Output Level:
9 V R.M.S.
Total Harmonic Distortion:
Less than .02%
Unprocessed
Less than .05%
Front
Less than .12%
Rear
Less than .05%
Subwoofer
Signal to Noise Ratio:
89 dB, CCIR 2k Weighted, max level
Input Impedance:
50k Ohms
Output Impedance:
221 Ohms
Noise Test Reference Level:
-12.5 dB
Surround Outputs non-inverting
8
Audio Inputs
6
Audio Outputs (extra L & R) non-inverting
2 sets
Video Specifications
Frequency Response (-3,-3 dB):
20 Hz - 10 MHz
Buffered Input Impedance:
75 Ohms
Buffered Output Impedance:
75 Ohms
Maximum Input Level:
2 V R.M.S.
Maximum Output Level:
2 V R.M.S.
Composite Video Inputs / Outputs
4 / 4
Tuner Specifications
FM Section ;De-emphasis 75
sec *
Frequency Range:
87.50 - 107.90 MHz in 50 kHz steps
Total Harmonic Distortion:
Less than 0.25%
Frequency Response (-1,-3 dB)
20 Hz - 15 kHz
Capture Ratio:
2 dB
IHF (Usable) Sensitivity:
12 dBf
Mono/Stereo Sensitivity:
15/35 dBf
Alternate Channel Selectivity:
65 dB
Signal to Noise Ratio:
70 dB, A Weighted
Antenna Input Impedance:
75 Ohms